Patch Panels and Fiber Distribution
Attenuators
Bare Fiber Adapters
Cable Assemblies
Cable/Wire Markers
Cable Management
Cleaning Supplies
Connectors, SingleMode
Connectors, MultiMode
Couplers, Isolators, WDMs & Hybrids
Ethernet
Fiber Optic Cable
Fusion Splicers & Cleavers
Microscopes
PELCO Video Security
Polishing Machines, Pads, Film & Supplies
Polishing Machine Plates
Supplies
Test Equipment
Scribes
Tubing
Bulkhead Adapters
Network Simulators/OTDR Test Boxes
New Products
Fiber Optic Connector Polishing Kits
Hand Polishing Fixtures and Unipucks
Rentals
Tools
Product Catalog --> Supplies

       Adhesive Primer / Connector Epoxy
LOCTITE/PRIMER
Description:  Adhesive primer for making inactive surfaces active and enhancing the cure speed of anaerobic adhesive featured below. Bottle contains 1.75 fluid ounces.

LOCTITE/PRIMER
    More Info
LOCTITE/COMPND
Description:  High strength retaining compound cures fast (fixtures in ten minutes) and has a shear strength of 4000 psi on steel. Medium viscosity (1250 CPS) anaerobic adhesive can fill gaps to 0.015" diametral. Works great for using on connectors with ceramic ferrules. Bottle contains 1.69oz.

LOCTITE/COMPND
    More Info
RCG- 353ND
Description:  Oven cured epoxy works well for all types of connector ferrules. Package includes two part mix. Meets Bellcore specifications. Sold in 6 gram pack.

RCG- 353ND
    More Info
RCGSYRNDLS
Description:  B-D brand disposable syringe with 1.2mm detachable needle. These syringes work great for injection epoxy into a connector for termination. Sold individually.

RCGSYRNDLS
    More Info
BAF113
Description:  Heat cured epoxy works well for all types of connector ferrules. Dries at room temperature in 18 hours or can be oven cured at 100° C in 15 minutes. Package includes two part mix. Sold in 2 gram pack which is enough for approximately 40 to 50 connectors. Pot life is 20 minutes.

BAF113
    More Info
       Fusion Splice Protection Sleeve
DH1-23
Description:  Heat shrinkable protection sleeve, 23mm long.

DH1-23
    More Info
DH1-40
Description:  Heat shrinkable protection sleeve, 40mm long.

DH1-40
    More Info
DH-6
Description:  Ribbon fiber splice protection sleeve for use with 6 to 12 fibers. Measures 40mm long.

DH-6
    More Info
DH1-60
Description:  Single fiber heat shrinkable protection sleeve, 60mm long.

DH1-60
    More Info
DH-4
Description:  Ribbon fiber splice protection sleeve for use with up 4 fibers. Measures 40mm long.

DH-4
    More Info
       Cable Pulling Lubricant
TLF032
Description:  Techlube fiber optic cable pulling lubricant. Techlube is non-toxic, non-flammable, water soluble, and dries leaving a lubricating film. One quart bottle.

TLF032
    More Info
TLF001J
Description:  Same as above in one gallon bottle.

TLF001J
    More Info
TLHD32
Description:  Heavy Duty wire and cable pulling lubricant. Techlube is non-toxic, non-flammable, water soluble, and dries leaving a lubricating film. One quart bottle.

TLHD32
    More Info
       Tape Products
05400769764
Description:  Scotch 7 mil vinyl electrical tape is flame retardant and weather resistant. Conforms to UL 510 and CSA 22.2 # 197. Dimensions are 3/4" x 69' x .007".

05400769764
    More Info
RCG- 1700VYL TAPE
Description:  Scotch premium 7 mil vinyl electrical tape is not only flame retardant and weather resistant, but provides superior resistance to abrasion, moisture, alkalies, solvents, oil, and ultraviolet rays. It also stretches easier and aggressively sticks in all temperatures. Conforms to UL 510, HHI-595, and CSA 22.2 # 197. Dimensions are 3/4" x 66' x .007".

RCG- 1700VYL TAPE
    More Info
    Fiber Scraps Trash Can
FS-200
Description:  Small disposable trash can provides a safe and efficient method of disposing glass fiber scraps. Measures 4” high with a diameter of 2 5/16”.

FS-200
    More Info


Home | About Us | Services | News & Events | Products | Cable Configurator | FAQ's | Contact Us

©Copyright 2013 REALM Communications
Web Solutions by E-Nor
This site is optimized for Netscape 4.0 and Internet Explorer 5.0 or higher. Please download an updated version.